- Answered: Old Forum Data?
- Answered: UltraSonic Sensor's Hysteresis
- Answered: Does the Vex transmitter have a trainer port?
- Answered: Vex Serial Port
- Answered: Sensor pin connectors...
- Answered: Transmitter Tether Port Signal
- Answered: rf receiver cable
- Answered: problem
- Answered: Foam balls and new VEX products.
- Answered: Innovator-1
- Answered: Vex Controller IO
- Answered: Vex Programming questions.
- Answered: VEX programming interface closed?
- Answered: Vex Competiton Port
- Answered: programming errors
- Motor Trouble
- Answered: Optical Shaft Encoder; interrupt or digital port?
- Answered: High Resolution Optical Encoders
- Answered: I2C and SPI Interface Support
- Answered: Plastic skins for our Vex Models
- Answered: Power Pack Confusion
- Answered: Ultrasonic sensor measure
- Answered: Programming: Sample code and misc related questions
- Answered: Remote problem
- Answered: LED Help
- Answered: CMU Camera
- Answered: inside a light sensor
- Answered: Camera help
- Answered: What is wrong with my Vex Charger?
- Answered: Ultrasonic report is almost never above mid 30s
- Answered: help!!!!!!!!
- Answered: What happened to the Hero 2007 photos I uploaded?
- Answered: How to wire a motor
- Answered: 2 motors
- Answered: Serial Communication
- Answered: motor clutchs
- Answered: Motor speeds
- Answered: PWM Splitters insufficient for Vex
- Answered: 23 mode with jumper 14
- Answered: Servo Programming
- Answered: Receiver pinout
- Answered: Vex Optical Encoder Question
- Answered: Receiver Data Format
- Answered: Help With Analog and Digital Inputs
- Answered: HOWTO Realign Servo Neutral Position?
- Answered: gathering data
- Answered: memory
- Answered: y cables
- Answered: Microcontroller HELP!!!!!!!!!!
- Answered: Vex_master_v7.bin
- Answered: VEX Labs trougle
- Answered: Alternate Motors
- Answered: Speed Controllers
- Answered: inventers guide
- Answered: i need help with my robot
- Answered: Looking for possible research mentor.
- Answered: problem with motor stall
- Answered: Programming kit availability
- Answered: Programming
- Answered: 10 motors vs 8 ports
- Answered: Processor Resources
- Answered: intake rollers
- Answered: Bad Servo Output
- Answered: How can I connect multiple micro controllers together?
- Answered: Confused about Ultrasonic sensors
- Answered: On/Off switch
- Answered: Pneumatics
- Answered: master code
- Answered: Vex product repair
- Answered: Yes with "IF", No with else
- Answered: robot construction
- Answered: Multiple Crystals?
- Alternative answer to 360 count Optical encoder
- Mech comp Re: Robot Pushing Force, Traction & TorqueFAQ #2 answer should be replaced
- Answered: Crystals
- Answered: Downloading Error
- Answered: Download problem
- Answered: motor jerks back and forth
- Answered: controller pgrm status light stays on
- Answered: Error - symbol 'txdata' has multiple definitions.
- Answered: Rx 1 light isn't on
- Answered: Analog Stick Sensitivity
- Answered: Line Following
- Answered: Problem with 7.2 volt battery
- Answered: maximum current
- Answered: Servo Current
- Answered: Engineering Notebook
- Answered: Vex Gear Pitch
- Answered: Microcontroller
- Answered: using UserAPI.h library with MPLAB C programming
- Answered: Ultrasonic Sensor with DDT tool
- Motor runs by itself
- Answered: Chain Breaking
- Answered: Micro Controller Issues
- Answered: Competition mastercode
- Answered: motor runs a little
- Answered: Accessory
- Answered: motor won't stop running
- Answered; Vex as speed/motor controller
- Answered: Max number of independent motors / servos can you control?
- Answered: Nylon Rope in FVC
- Answered:TX/RX ports
- Answered: Multiple ultrasonic sensors
- Answered: Radio Shack vs Vex
- Answered: Servo stall torque
- Answered: libraries for other compiler versions
- Answered: Motor Speed
- ANswered: Transmitter problems!
- Answered: Autonomous Mode Jumper Pins
- Answered: Transmitter problems.
- serious program issues hlllppppp!!!!!:eek:
- Answered: Connecting Multiple Microcontrollers
- Answered: Prgm Light Light Always On
- Answered: How do you poston the Vex Robotics Forum?
- Answered: Motor moduals.
- ANswered: Replacement Transformer for battery charger
- ANswered: Chain Strength
- Setting Serial Port Baud Rate
- Answered: I/O Ports
- Answered: I/O Ports
- Answered: I/O Ports
- Answered: A couple of questions about the Atlas Ball that you sell.
- Answered: Easy Turning
- Answered: Watchdog Petting via SPI
- Answered: Pneumatic solenoid specs
- Answered: VEX Gear Specs
- Answered: Remote Config.
- Answered: Compressor wires in microcontroller
- Answered: How much current can the digital outputs source and sink?
- Answered: Help!!
- Answered: Help With Battery Charger!!!
- Answered: Changing PWM Output Signals
- Answered: How do I convert a Parallax(Futaba) servo to drive a Vex shaft ?
- Answered: ni-cad Vs. NiMH
- Answered: UART-W0001: Overrun
- Answered: sensor watching
- Answered: Image prob, need help
- Answered: No signal for RX1 and RX2 on RC
- Answered: Cannot download EasyC program to controller
- Answered: Vex Controller Download Stopped working.
- Answered: Labview Graphical vex control
- Answered: loading problems
- Answered: Servo Range
- Answered: How Many IF stages in the receiver?
- Answered: What constitutes Green Rx # Status
- Answered: Motor Ports
- Answered: Code Warrior
- Answered: program tracking
- Answered: Worm gears and Racks
- Answered: {Secret} Transmitter Setting
- Answered: Transmitter Problem
- Answered: Differential Frame
- Answered: Wheels Stutter
- Answered: mlab / mcc variable usage problems.
- Answered: Servo Help
- Answered: Optical shaft encoder
- Answerws: Micro controller Problem.....
- Answered: Trade in broken and unusable metal parts
- Answered: Having trouble compiling
- Answered: Metal
- Answered: Motor, Controller or Logic problem?
- Answered: useing serial port to control the robot
- Answered: Amazon and Vexplorer
- Answered: Question about sounds
- Answered: changing the pwm deadzone
- Answered: Serial Control?
- Answered: Can't download master code or test program
- Answered: Program light out and flashing light above after download.
- Answered: Microcontroller stuck on Prgrm Status
- Answered: intake roller
- Answered: Vex Optical encoder
- Answered: Purchasing in the UK
- Answered: Will any accessories be available for the new VEXplorer set?
- Answered: Unable to download ANY code to the Vex controller
- Answered: Vex Remote Control
- Answered: SolidWorks VEX Manual/Tutorial
- Answered: Controlling Pneumatics
- Answered: VEX IFI Loader on Win98-SE
- Answered: PWM IN Granularity
- Answered: Whatever happened to the new accessories for VEX?
- Answered: Analog Values From Volts And Timers...
- Answered: Vexplorer Range
- Answered: 4WD Plans
- Answered: defective vexplorer?
- Answered: Problem with line followers:confused:
- Answered: Non-slip pads
- Answered: Vex Battery Holder Step File
- Answered: Problems with the pneumatics kit.
- Answered: Vexplorer suffers meager range
- Answered: Vex Serial Communication
- ifi_startup.c Linker Error - MPLINK v3.90
- Answered: Transmitter has to be on???
- Answered; Using Vex to control Computer operations
- Answered: Battery pack voltage?
- Answered: Programming: Linking Error
- Answered: : Less torque when motor in revere?
- Answered: Tank Tread Upgrade Kit - Conveyor Belt Insert Problem
- Answered: VEX Battery Charging
- reception problem...
- Answered: problem with my micro controller
- Answered: Vexplorer Questions
- Answered: Time for loop execution
- Faster update rate?
- Answered: VexExploroer Camera Noise
- Answered: Tank Tread Question
- Answered: Four Motors to One Transmitter Channel
- Answered: Vexplorer Battery & Charger kit
- Help
- Writing C instead of EasyC
- 2008 FTC Competition Alltimers Library
- Remote Control's LCD displaying Robot Info?
- Vex and I2C devices.
- Answered: Vex Potentiometer - will it be out soon?
- Bumper Signal
- Protecting Vex
- Answered: Vex kit parts
- Can you use the new VEX Signal Splitter with the Tether Port?
- Vex crystal size
- Any clues to Revell Customer Service
- Answered: FTC Code
- Answerd: Ultra's
- Answered: broken vexplorer claw
- Answered: Two Transmitter Question
- Answered: 10 seconds & off
- Answered: Lots of Servo "jitter" on the Signal Splitter
- Answered: Connecting Innovation First FRC Robot Controller to IFI/Intelitek Loader
- Answered: Erratic robot control behavior
- Answered: Help w/ A Lot of Stuff
- Answered: Vex Battery
- Answered: My Vexplorer Solidworks DVD Does Not Install
- Answered: Question about robots in VEX RCR videos.
- Answered: Vex controller Problem
- Answered: Vex Robot Problem
- Answered: Transmitter Problem
- Answered: Autonomous Robot
- Answered: Tank tread chain size
- Answered: Vex Motor
- Answered: Dynamic list
- Answered: Vexplorer Motor
- Answered: microcontroller problems
- Answered: Modify a Servo Motor
- Answered: Vex Motor PWM Signal
- Answered: Problem between Vex controller and non-vex motor
- Answered: Vexplorer transmitter range
- Answered: IFI Loader wont install
- Answered: Multiple Auto modes?
- Answered: Vex Motor Module update rate
- Answered: Vex Controller - Pgrm Status Issue
- Answered: Controller Interfaces
- Answered: Channel 2&3 switched