High Strength Gear Kit

From VEX Wiki

This kit provides several new gears with features to handle higher loads. Each of these gears has a wider face width; this means each tooth is wider so applied loads will be spread over a larger area. The 12-tooth High Strength Gear is molded out of powdered metal. The 36-tooth and 60-tooth Gears have powdered metal inserts. These metallic components will protect the gear from high loads applied by a VEX axle.

Specifications

Compatibility High strength gears mate with all VEX spur gears. All VEX Square Shafts 0.125" (3.2mm) Material Type Metal:12-tooth Ggear, Square Gear Insert Delrin:36-tooth Gear, 60-tooth Gears, Free Spinning Insert Gear Type Spur

Diametral Pitch 24 Pressure Angle 20 degrees Face Width 0.500" (12.7mm)