Help!!! Our lift is Leaning!!!!!

  1. 6 months ago

    For some reason our lift is leaning and its not because of height!!! HELP!!!

  2. Malovelent1

    10 Jan 2018 Cumming, GA 109Z

    @Thunderbots101 For some reason our lift is leaning and its not because of height!!! HELP!!!

    Some pictures would be best to visualize the problem.

  3. briancole

    10 Jan 2018 Utah 4270C

    We've had the same problem. Here's your checklist:

    • check motors to see if any aren't on or are maybe accidentally high speeded.
    • make certain your bands are balanced.
    • x brace if you can.
    • send a joint axle that turns both sides to help force them to turn together.
  4. Can you tell me what an X-brace is????

  5. briancole

    10 Jan 2018 Utah 4270C

    and of course check the program

  6. Also I can send pictures if needed!!!

  7. briancole

    10 Jan 2018 Utah 4270C

    @Thunderbots101 Can you tell me what an X-brace is????

    Look at 9065C. It's just a set of two bars in an x that connects the two sides of your lift.

  8. briancole

    10 Jan 2018 Utah 4270C

    Pics would be nice.

  9. Ok, Ill send them.

  10. But How????
    /_\

  11. -_-

  12. briancole

    10 Jan 2018 Utah 4270C

    you don't know how to send pics?

  13. no...................................................................................

  14. Can you show me the ways.

  15. briancole

    10 Jan 2018 Utah 4270C

    Just use the link icon on the top of the post to link a picture file.

  16. I dont know how to send them to the computer.

  17. are you using rubber bands to help with bouyancy? if so it could be that there arent enough on one side

  18. briancole

    10 Jan 2018 Utah 4270C

    Take a snip and then save it as a JPEG file.

  19. Were not using rubber bands. Should

  20. We? (sorry)

  21. Newer ›
 

or Sign Up to reply!