Vex 3141S winter reveal

  1. 10 months ago

    Here is the video for our winter reveal. Feel free to ask any questions.

  2. Dokkaebi

    13 Jan 2018 Deal with it I like chocolate
    Edited 10 months ago by Dokkaebi

    That's really similar to my robot, How high can you stack, and are you going to add any more bracing?

  3. briancole

    13 Jan 2018 Utah 4270C

    Is the unloading the mg strategy faster than normal stationary stacking? Also, what's the gear ratio on your adjustment arm?

  4. briancole

    13 Jan 2018 Utah 4270C

    With 4 motors, you could probably run that lift turbo.

  5. briancole

    13 Jan 2018 Utah 4270C

    @Dokkaebi That's really similar to my robot, How high can you stack, and are you going to add any more bracing?

    And to 1970k. And 8675a, and 9065c, and 929u, and 202z, and half of 2131, and what my bot is planned to look like. In other words, we have reached design convergence.

  6. BBBcube3.14

    13 Jan 2018 Middle of Nowhere 8410C

    How long could it last in Vex HYDRO?

  7. Aeden_6007

    13 Jan 2018 Los Angeles, California 6007X

    Looks good. Maybe could do with more rubber bands on the lift though.

  8. @Dokkaebi That's really similar to my robot, How high can you stack, and are you going to add any more bracing?

    We can stack up to 15. And we’re continuing to make the lift more stable.

  9. @briancole Is the unloading the mg strategy faster than normal stationary stacking? Also, what's the gear ratio on your adjustment arm?

    We’re not sure yet. Right now I’m nebraks it’s better to get the stacks placed than worry about stationary. And our 4 bar is 3:1

  10. @briancole With 4 motors, you could probably run that lift turbo.

    We’re actually thinking on making it 2 motor 1:5 torque and make it a 6 motor turbo base to help us against defensive robots

  11. Deleted 10 months ago by dsivo
  12. dsivo

    14 Jan 2018 Hopkinton MA 2602H

    How do you guys track the distance and direction of your robot in autonomous? I don't see any shaft encoders.

  13. @dsivo How do you guys track the distance and direction of your robot in autonomous? I don't see any shaft encoders.

    We have encoders on the back of both of our drives

  14. What is the Vortex alliance? I think I saw something like it on 8675A's robot along with 1970K's.

  15. Easton

    15 Jan 2018 GA, USA 1958A
    Edited 10 months ago by Easton

    @pkrish What is the Vortex alliance? I think I saw something like it on 8675A's robot along with 1970K's.

    I know a couple of the members of Vortex are: 8110x, 1970k, 8675a, 7232x, 3141s, 2719b, 9065c, 1008m, 8675c, and 929u.

  16. I'm also quite sure you guys took the naming scheme of "Nessie" from 5069D last year... (we were allianced at state last year)

  17. Edited 10 months ago by pkrish

    @Easton I know a couple of the members of Vortex are: 8110x, 1970k, 8675a, 7232x, 3141s, 2719b, 9065c, 1008m, 8675c, and 929u.

    ahh... does this have to do anything with Johnny English? XD

  18. RoboTurtleLord

    15 Jan 2018 Somewhere in America 109Z

    @pkrish ahh... does this have to do anything with Johnny English? XD

    LMAO :)

  19. @pkrish I'm also quite sure you guys took the naming scheme of "Nessie" from 5069D last year... (we were allianced at state last year)

    No. We renamed to The Lochnut Monster. So we just thought Nessie would work

  20. How long until you do another complete rebuild of you robot???

  21. Newer ›
 

or Sign Up to reply!