62019P California States Reveal

  1. 9 months ago

    This is our robot for states, this was our first time driving it.

    link text

    Just four more screws trust me

    when you make states reveal but in reality its a video thats 2 months old and you have to post it because you dont know if your actual states robot will be ready for states :P

    btw we made it to worlds got eem

  2. You guys should get some auto stacking going so you guys can stack faster cuz ur current driver isnt cutting it

  3. Still looks like a great robot. I’m sure after some practice you guys will get it down. Good luck at states!

  4. Ashwin Gupta

    7 Mar 2018 California FRC 3476

    Nice robot guys! Certainly has changed a lot since the Corona tourney on Feb 10 :P

  5. Deleted 9 months ago by 1961Uranium
  6. TheCrimsonDoubleChin

    7 Mar 2018 Appleton, Wisconsin 5062C,A,D

    Good stacking for the first time driving it! What I recommend (out of personal experience) is just a little more cross-bracing. The right side looks a little higher than the left side almost at all times. As soon as we added cross-bracing to our lift, we noticed a change in lift efficiency.

  7. Easton

    7 Mar 2018 GA, USA 1958A

    @Jake_B Good stacking for the first time driving it! What I recommend (out of personal experience) is just a little more cross-bracing. The right side looks a little higher than the left side almost at all times. As soon as we added cross-bracing to our lift, we noticed a change in lift efficiency.

    My lift was pretty stable before we added cross bracing, and so we never even added bracing (weight reduction). One side of our lift is like .5 inches higher but it doesn't impact stacking much. When you added bracing did your stacking become easier or just your lift leveled? Because ours is pretty much level, the only thing we need is stack speed.
    @Subway Kid robot looks good! All you need is a little more driving practice now

  8. TheCrimsonDoubleChin

    7 Mar 2018 Appleton, Wisconsin 5062C,A,D

    @Easton My lift was pretty stable before we added cross bracing, and so we never even added bracing (weight reduction). One side of our lift is like .5 inches higher but it doesn't impact stacking much. When you added bracing did your stacking become easier or just your lift leveled? Because ours is pretty much level, the only thing we need is stack speed.
    @Subway Kid robot looks good! All you need is a little more driving practice now

    Lift became more stable and reliable. We must've had uneven tension because when we added it, it sounded like the motors had a weight lifted off of their shoulders (probably because they did) and it just lifted better.

  9. 8 months ago

    when you make states reveal but in reality its a video thats 2 months old and you have to post it because you dont know if your actual states robot will be ready for states :P

    btw we made it to worlds got eem

  10. M8R

    14 Mar 2018 Los Angeles, California TP 2150A/ITZ 7700S

    boosted animals

 

or Sign Up to reply!