1. 2 weeks ago

    Joey The Great

    Nov 5 Maryland 24k

    I have recently had an idea for a ball intake and i want to see if anyone can see any major flaws in it or disadvantages.

    So basically, it stems from this: Half of the balls on the field are on top of a cap, (not including preloads). Most teams are happy to knock them off and then chase after them, wasting signifigant time. My intake idea would basically be a rubber band roller on a hinge that can raise and lower passively. ( i am attaching a highly proffessional diagram) That way, we could pick up balls faster than most other teams and gain a big advantage in the flags.

  2. Siraj

    Nov 5 3116S

    In my opinion, when you go to get a ball you are more likely to tip the cap, the balls would either get stuck or roll away.

    i would suggest prototyping anyway as it could still work.

  3. abennett5139

    Nov 5 Concord, NC 5139

    The main problem I would see is that the roller may not go up passively on the ball, but instead go under it and flip the cap/get stuck under the cap. A way I think to solve this maybe to make the roller bigger than the cap so that it "climbs" the cap to get the ball But that may present a problem that it just pushes the ball and doesn't intake it.

    I think your idea could work and is a great idea just needs a lot of prototyping.

  4. meng

    Nov 5 Singapore 8059
    Edited 2 weeks ago by meng

    Something like this....?

    About 0.38 min onwards.

    Edit: this is not passive though.

  5. Joseph | 621A

    Nov 5 Franklin, Indiana 621 A
    Edited 2 weeks ago by Joseph | 621A

    I prototyped something like that early on in the season. It worked fairly well but I had to get rid of it due to some other things I wanted to do. I would definitely suggest trying it. Just try and make your rollers a good size because bigger ones definitely help. Also I would suggest making your rubber bands sort of loose as if they're too tight then it'll just push the balls away instead of pulling them into the intake.

  6. Gameoa

    Nov 6 lemme think about it... 37409A

    I also tried out a hinged intake at the start of the season. We did not have a good mounting for a stopper on ours, since we sacrificed a lot in order to add a double-double ratchet sytem (don’t ask, or do, and I wont spare you the details :) ) Anyways, if you do have a hinger intake, make sure you have a solid stopper to keep it from just limply dangling the whole time

  7. littlebro5

    Nov 6 Redondo Beach 8054

    I'm a bit confused on how it would raise and lower passively - care to give a more detailed explanation?

  8. Mark Finley

    Nov 6 Las Vegas, Nevada 6891B - Kep's Boys

    @littlebro5 I'm a bit confused on how it would raise and lower passively - care to give a more detailed explanation?

    If you look at 0:33 in the video that meng linked you can see a roller that is on an arm, however this roller has pneumatics to lift it up and down. Imagine that those pneumatics are no there, and the arm just goes up a little bit when a ball goes into it. This allows for the roller to "climb" up the caps and grab the balls on top without having to waste time knocking the balls off and chasing them.

  9. Got a Screw Loose

    Nov 6 Ohio 44833B

    @Mark Finley If you look at 0:33 in the video that meng linked you can see a roller that is on an arm, however this roller has pneumatics to lift it up and down. Imagine that those pneumatics are no there, and the arm just goes up a little bit when a ball goes into it. This allows for the roller to "climb" up the caps and grab the balls on top without having to waste time knocking the balls off and chasing them.

    To add to this, I would include very loose rubber bands pulling the arm down to ensure there's enough friction to actually intake the balls.

  10. Gameoa

    Nov 6 lemme think about it... 37409A

    @Got a Screw Loose the weight of the rubber band roller should be enough alone, but if it is not, then yeah put some rubber bands on it.

  11. Joey The Great

    Nov 6 Maryland 24k

    @meng Something like this....?

    About 0.38 min onwards.

    Edit: this is not passive though.

    yeah, basically like that but the rotation of the roller is what makes it climb the cap/ball

  12. Vyx

    Nov 6 Florida 82987A

    @Joey The Great yeah, basically like that but the rotation of the roller is what makes it climb the cap/ball

    to passively climb, you'd need a low friction, lightweight roller assembly and probably run the roller at a much slower speed with high friction rubber bands so that it actually climbs onto the balls instead of bumping them and knocking them off

    seems pretty difficult

  13. Got a Screw Loose

    Nov 6 Ohio 44833B

    @Vyx to passively climb, you'd need a low friction, lightweight roller assembly and probably run the roller at a much slower speed with high friction rubber bands so that it actually climbs onto the balls instead of bumping them and knocking them off

    seems pretty difficult

    I didn’t even think about the low speed. At a high speed, wouldn’t the roller start to literally lift up due to the rotational force? Or would the weight just make negligible?

  14. Vyx

    Nov 6 Florida 82987A

    @Got a Screw Loose I didn’t even think about the low speed. At a high speed, wouldn’t the roller start to literally lift up due to the rotational force? Or would the weight just make negligible?

    I think just the weight of the motor spinning it would make it difficult for it to achieve any lift

  15. Got a Screw Loose

    Nov 6 Ohio 44833B

    @Vyx I think just the weight of the motor spinning it would make it difficult for it to achieve any lift

    @Vyx What if you ran it from a chain, and framed it with as little aluminum as possible? That’d be kind of scary.

  16. Joey The Great

    Nov 6 Maryland 24k

    @Got a Screw Loose @Vyx What if you ran it from a chain, and framed it with as little aluminum as possible? That’d be kind of scary.

    why would that be scary?

  17. Got a Screw Loose

    Nov 6 Ohio 44833B

    @Joey The Great why would that be scary?

    Scary cool. An intake spinning that fast would be awesome, and I wouldn't want to put my fingers near that gearbox when powered

  18. last week

    Joey The Great

    Nov 7 Maryland 24k

    oohhhh ok

 

or Sign Up to reply!