EasyC Pro

VEX V5 General Discussion Technical Discussion
1

OK, so i just got EasyC Pro through my FRC team. The problem is, I don’t know where to start.Any tips on creating a simple “dead-reckoning” autonomous robot that uses bumper sensors to guide itself around? Like if it runs into a wall, it will try right, then left, if both lead to a bump, it will back up then turn right, then left, then repeat if still unsuccessful.

Thnaks!

2

There are several tutorials for both Vex and FRC under the Getting Started section of the easyC help file. Once you run through all the samples, you should be very proficient with easyC. Hope this helps!