Hello i need a little help my drive base 2 wheels are lifting up and it is cuaseing them to not touch the ground one of the wheels are connected to a motor i have added a beam for suport and it is not working i made sure all of the screws are tightened and it is still not working can you give me any ideas
First, have you tried to balance the weight distribution on the robot? Not doing this properly is one of the most common causes of this problem.
Second, you may want to change the title of this thread to something more related to the problem at hand.
Okay and everything is balanced
May you please share some photos of your robot?
Ah, I see now. It appears the c-channel in the back of the photo that holds the wheels is screwed in sideways, this is giving the robot the slanted look. Make it straight and you should be fine.
Sorry I am new what is a c channel
there are a lot of build quality issues with your drive causing it to be all warped like that.
Since you are new, I suggest looking through this resource I made about making the most basic kind of drive
Ok thank you for your help I realy apritiate it
Me and Justin are on the same team we fixed this problem and it is straight and are drive base is functional but a moter is down so we have to ficks it and take it off and put on a new one we are done other than that thanks for your guys help