Looking for support with Addressable LEDs

[jpearman]

probably hardware compatibility issue if the code is good.

V5 Addressable LEDs

I do want to point out a couple of issues that will be encountered when driving the addressable LED strips from the 3wire ports. Some strips will work directly without needing to do anything about these, however, some strips may need additional logic to work reliably. The addressable LEDs (WS2812, neopixel) use 5V logic but the 3wire ports are 3.3V logic. The LED want’s to detect logic 1 at 3.6V or above according to datasheet, so really our logic levels are too low. However, some strips I’v…