I need help changing driver control speed in VCS. My driver wants to be able to change how fast the drive train moves (Change it’s max speed) with a simple button press. I was wondering if this was possible with a variable. I tried setting Axis Values to a variable but that didn’t seem to work. If …

I think this post should have everything you need [image] Slowing Down V5 Motors VEX Coding Studio Tech Support Usually its cubic. Here is a graph of joystick cubed vs joystick itself. [image] Someone asked for this on facebook, here is my response from there.

Yes, it is very possible with a variable. Here is an example: (in driver loop) int rate = 1; if(Controller1.WhateverButton.pressing()){rate = 2;} //sets drive to half speed else if(Controller1.OtherWhateverButton.pressing()){rate = 1;} //sets drive to full speed F…

When i try to do this for our team, when i have the value of the controller axis divided by the rate it turns it to arcade drive and everything is on the left joystick. then when i get rid of the dividing by rate it works normally but i cannot change speeds. please help.

Hooray reviving threads. @99750A Please try to make your own thread when you have problems like this. You can put the link to this thread in your new one and people will be able to help a little more. I am not sure what your problem is without your code, so if you could post it that would be great. …

after further inspection of code i was able to find the problem. thanks for the help though

yea but would this work for people who are already using an arcade drive code? *----------------------------------------------------------------------------*/ /* / / Module: main.cpp …

V5 Changing Driver Control Speed

VEX V5 Robotics Competition

tabor473 February 13, 2019, 10:10pm 2

I think this post should have everything you need