We have one week until our next competition and we have a chassis and a scraped Double Reverse Four Bar do we have time to make a simple reverse stacker that could at least finish well in semis

uhh, @Jagwirerobotics1 please don’t mount the intakes to the tray. This could make releasing the stack of cubes more prone to falling over and harder to stack. It would also be harder to add compression. I would recommend putting the rollers on stand-offs and then compressing them from the side wit…

So I need to mount to chassis but allow it to have enough flexibility to still spread apart when putting tower in corner

the rollers don’t have to have a lot of flex but if u push pretty hard they should spread apart. just mount them on stand-offs and use a stand-off on a pillow bearing to push the rollers in. I made mine really pushed in and could get 12 cubes with this setup on my old robot. make sure the rollers ar…

Do you have pic so I can get an idea about how to mount because our chassis is a little weird due to the fact that I configured it to be strong enough to resist a defensive robot [Vex tower takeover fold out intake idea] So like this

Can confirm dont mount intake on tray it doesnt go to well

i think that system should work but an easier (and maybe a little jank) system that works well is just putting each roller on two stand-offs, and then having a standoff or screw that pushes the roller in from the outside of the robot. I don’t know if I can send any pictures tonight, but I probably c…

[image] How To Fix Intake Compression [Guide] VEX V5 Technical Support [20191001_170408] Does this help? @Sylvie has a guide on this

I’m pretty sure that’s for complex trays, not simple trays, but maybe it could work for both.

[image] [image] [image] This is the kind of jank 12 cube setup I had for early season. Not very pretty but works well.

How long does it take to build reverse stacker?

VEX V5 Robotics Competition V5 Tower Takeover (19/20)

Doctortictac November 12, 2019, 5:38am 20

@Sylvie has a guide on this