Hello all! Our team is proud to present our two Ri3d robots for Over Under! The first robot is the skill competition robot that has been made public last time. Details: 81988E 299 Official Skill Challenge and CAD picture - #7 by Orrero_yang It has almost all the functions needed for Over Under, …

I like the designs. If you ever build this would you post it?

They already have! This robot is sick, take a look! [image] 81988E 299 Official Skill Challenge and CAD picture VEX Robot Showcase Hello, All! We are proud to show you the robot we designed. This robot won the championship of the high school Robot Skills Champion and Exce…

Would you guys mind showing how you did your slip gears?

We use two screws to fix it on the side of the brain. [P1] [c5e81e3ff41068fa249d7f73eec348f]

We use a bench grinder to make slip gears. 27t was cut off from 36t and 9t was retained.

why not do a double slip if you only need 9 teeth?

We tried double gears, but we used a 36:60 gear ratio and it wouldn’t run at full speed.

Do you guys have a ratchet mechanism on the cata if so could I see?

We don’t have ratchet, only use program to control cata.

VEX Over Under 81988E Extropy Robot CAD

VEX V5 General Discussion VEX Robot Showcase

Micahy321 September 19, 2023, 10:01pm 3

They already have! This robot is sick, take a look!