Does anyone know if the vexiq (robotmesh) arcade drive function square the joystick inputs automatically, or is that handled by the user? Thanks, Drew

I have heard that some people do this, but I don’t think it is the default behavior. I think it’s a good idea, though.

Could someone explain that to me? So if you push the joystick forward 50% and left or right 0%, the robot should go forward at 50% speed. Wouldn’t squaring it make it 100% at the halfway point?

[image] calvc01: explain that to me This thread, and links… [image] Slowing Down V5 Motors VEX Coding Studio Tech Support Usually its cubic. Here is a graph of joystick cubed vs joystick itself. [image] Someone asked for this on facebook, here is my response from …

I would do it this way… So if you move the sticks halfway the motors only go at 25%. It was give you much finer control over the slower movements, but if you move the sticks to the edge you can still get 100% out of the motors. [image] To make sure that both ends wouldn’t be positive, just multi…

Vexiq arcade drive squared inputs

VEX IQ General Discussion IQ Technical Discussion

rhowbot August 1, 2019, 5:55pm 4

This thread, and links…

Like this: