Hello, All! We are proud to show you the robot we designed. This robot won the championship of the high school Robot Skills Champion and Excellence Award in the just-concluded competition in Hangzhou, China. Competition: 2023首届“中国蓝AI未来之星-博思杯” VEX机器人挑战赛全国邀请赛-VRC高中组 : Robot Events Skills Video: …

How does the intake go up and down as I don’t see a visible motor to pull it up or down

There is no motor to pull the intake up. The intake is on a hinge, so when they run into the goal, the intake moves.

It made for let the robot slide along the walls. But the reality is that it doesn’t seem to be of much use. : (

Micahy is right. It only made for our robot can go into the goal and put the triballs into the goal easily.

Hi just wondering how you guys made the hs shaft so long I been tryna figure how to make my intake be larger but the shaft has always been to small so when I saw this design I thought how did they make the shaft so long. So just asking hgow you guys made it that long

Vex sells 24 inch ones. [IMG_6776]

You can buy 24" HS shafts from VEX [image] High Strength Shafts & Hardware High Strength Shaft Hardware functions similarly to standard ⅛” shaft hardware, just on a larger scale. Use the High Strength Shaft Bearing to allow shafts to turn smoothly, the High Strength Shaft Spacer Kit to p…

Ohh didnt realizes thanks for telling me about it

How many teeth did u shave of ur slip gears?

Might not be as robust but you could also screw joint each sprocket of the rubber band roller as far apart as you need.

81988E 299 Official Skill Challenge and CAD picture

VEX V5 General Discussion VEX Robot Showcase

VexTeamZ October 2, 2023, 2:54am 21

You can buy 24" HS shafts from VEX

Or couple them like this if you don’t have any: