My team is trying to print this: [image] V5 Scuff Controller Add-on | Online Challenges But based off the renders and the CAD file, the clamshell part (the part that wraps around the controller itself) appears to be one big piece. Is this supposed to be printed …

Its printed in one piece, it slips on to the controller with some force

The clamshell itself is one big piece, but there is a rod that slips in to keep it together.

It kind of pries apart on the bottom. Appears to be one piece

I just printed our first set the other day. Depending on your printer and the way you have your support material setup, it could be difficult to print the clamshell. The clamshell splits at the micro usb port hole. You can use a pin or even a piece of cut paperclip to put through the pinholes. I pri…

Does anyone just have the plain stl files, so that it is possible to print this item in cura

[image] Add on to V5 controller VRC > Tower Takeover (19/20) Since so many people have been asking in this thread recently, here’s a .zip containing all the parts in STL format: v5_scuff_controller.zip (2.7 MB) To be clear, I have no association with this project other t…

Thanks a lot! Really appreciate the information

does anyone know how many square inches it is?

how did you end up printing the clam shell part.

Hello vex forum, I started printing the scuff paddles and I thought that the camshell should be two pieces. This way it would use little supports and would probably would also have a better quality. Also when printing in one piece your running the risk of damaging your controller. So isn’t best to j…

How to print scuff paddles for V5 Controller

VEX V5 General Discussion

holbrook November 30, 2019, 9:08pm 7