Ok, if the V5 is not powering up, there’s really no way to troubleshoot. Give vex support a call.
I have the same problem. This is after a session using @RobotMesh_Support . RobotMesh prompted me to update the firmware, and I allowed it, and an error was reported, but RobotMesh and the brain continued to work for the rest of that session. However, next time I powered up, I got the “invalid asset table version” error screen
Ok, resolved my problem using the firmware updater utility
@MattSnyder, thank you for the report. We’ll look into the error handling code.
When the asset table version is invalid, this can be solved by re-downloading the V5 firmware. Within a Robot Mesh Studio project, click on the Options (gear icon at the top-right) and choose Start firmware update…. Wait for both the BOOT firmware and the ASSET tables to download and restart the brain.
Or, use VEX’s firmware updater utility.
jpearman, can you send me those instructions? I am having the same problem.
Just grab the standalone V5 firmware updater from here, it will probably detect invalid assets and allow update.
If that doesn’t work, select the force update option after following the instructions below for showing the advanced options.
@jpearman on help.vex.com there is an article posted 11/21 about using the standalone for Battery Medic and the screen shot indicated the firmware updater version 1.0.6 - do you know when it will be released?
It was supposed to be up on the same day, fell through the cracks because of the holiday I suspect. It will be version 1.0.7 and should be available early next week. In addition to the battery diagnostics, it has some support for offline use, that is, once at least one update has been done it caches the latest vexos and will use that if it doesn’t have network access. It also collects additional system information to help with tech support, specifically the last 512 log entries.
great - look forward to new diagnostics.
BTW kudos on the green radio LED for feedback that robot in connected to field and software running in competition mode - clear feedback for inspection and on the field that robot is ready (no guarantee that the team has the right V5 Controller in their hands… )
Would it be possible to get those instructions.
One of my machines just did this today.
Follow the instructions here to enable the optional features in the V5 firmware update utility.
(no need to actually run the battery medic)
enable the “force update” feature and the utility should present the “Update now” button again.
could i also get those instructions we are having the same problem
see my previous post
and this one earlier in the thread.
We have had the same issue with a few of our cortexes. It has happened right after updating the brain in VEX Coding studio. Please advise.
see the post above
Would it be possible to get this too?
bruh you brought back a dead thread
It’s really not necessary anymore, if the V5 update failed, then just power cycle and let VEXcode try again.
jpearman, Can I also get those instructions?
The previous post explained that all you need to do is let VEXcode try the update again. If that doesn’t work, the instructions for using the V5 firmware utility are earlier in this thread.