I’ve started brainstorming for this years game over under and I wanted to know if you guys had any ideas on it.

Be very careful with the possession limit if you do that. Most likely the way you intend to use it would be illegal.

I am thinking of using a 6m drive (280 rpm) and a DR4B. Knowing that a DR4B needs 2 motors to function, I was wondering how I would make a flex wheel intake/claw for the end of the DR4B. Any ideas?

I’m not too worried about it the possession trick is to line them up and just push them out of there but thanks for the concern

Would you suggest Protobot or Fusion 360 to be the more useful software for prototyping?

for cad scans I would use Protobot that’s what I’m using and onshape

if you are not on windows you could use Wine [image] For people who want to use Protobot on a machine that is not Windows....Wine! Technical Discussion Protobot runs well using Wine . I have not tested it on Linux yet, but it works well on my Mac. For macOS, I like to use W…

Plus throwing the triballs from the opponents team goal to your other team on ur zone, though am assuming it wont be easy as that

I’m doing a 4 motor, 480 rpm drive on 4 inch omni’s

That is what our robot is designed to do

I designed the robot before the manual came out. we made a 2.0 robot so that we get elevation points. I’ll release the cad files for it in a couple days.

Any overunder robot/strategy ideas

VEX V5 Robotics Competition V5 Over Under (23/24)

OrangeMan May 4, 2023, 12:51pm 90

if you are not on windows you could use Wine