Hey does anyone know how to configure a feed with one motor ,because my team has a pretty good flywheel but we only have one more motor left. Any ideas ?

[image] B1rds_Ar3nt_R3al: one motor will bring it up 6 inches to the spot where they will be indexed to the flywheel [image] B1rds_Ar3nt_R3al: feed will bring it up a short ramp no Numatics necessary! just use a motor, and several stages of intake (probably 2) to propel the disc upward…

[image] How to best design an intake using one motor VEX V5 General Discussion if you don’t have Numatics you could possibly use a linear gear system it may be quite slow though i mentioned this in a pervious post in the thread it might not be that fast but you could …

In addition to a linear gear system, you could also try a cam gear indexer

there are other options out there though if your team cant afford or cant get numatics that could work just as good or even better look at mentor built for example MENTORBUILT - A Robot Made in 12 Total Hours For Your Enjoyment

Numatics, pervious… Not to be that guy, but :person_facepalming: OCD activated Why is it that spelling does this to me and not the state our lab is in?

I have a blue motor that moves at 600 rpm so speed isn’t my problem dealing with a one motor feed to get it to the indexer ( linear slide )

No I was just wondering if anyone knew an intake configuration for a steep angle with one motor.

I would suggest watching Ben 606X’s video as it could help your team brainstorm ideas that fit your bot

How to best design an intake using one motor

VEX V5 General Discussion

axharrell04 October 31, 2022, 7:04pm 38